Cleaning a wooden deck requires the right pressure setting and the right tip to get the job done. Soft woods such as cedar or pine should be washed with 500 to 600 psi, while harder woods can go up to 1200 to 1500 psi. It's important to note that Pressure Washing in North Charleston SC can cause chips in wooden decks, so it's best to avoid using too much pressure. If there are any areas of the deck that are already starting to split, Pressure Washing in North Charleston SC will only make the problem worse. When using a pressure washer, it's important to use a cleaning solution that is specifically formulated for pressure washers.
Most deck cleaning solutions contain bleach, which can damage the joints of a pressure washer. Before staining or painting the deck, it's a good idea to sand it and then pressure wash it again to remove any sand particles. To get the correct angle and water pressure for cleaning the deck, you must connect a nozzle to the pressure washer. Make sure that the hose has a clear path to the pressure washer and to the area where you are working so that it doesn't bend or snag, blocking the flow of water to the pressure washer.
Pressure washing is an effective way of removing dirt, dust, and other debris from a deck, as well as removing old layers of paint or stains from its surface. A deck cleaning solution can help remove stubborn dirt and oils, but it is not necessary for pressure washing a deck. When it comes to pressure washing your deck, it is important to use the correct settings and nozzle tip in order to avoid damaging your wood. Soft woods such as cedar or pine should be washed with 500-600 psi while harder woods can go up to 1200-1500 psi.
It is also important to use a cleaning solution specifically formulated for pressure washers in order to avoid damaging the joints of your machine. Additionally, sanding your deck before staining or painting it is recommended in order to remove any sand particles that may have been left behind after pressure washing. Overall, pressure washing is an effective way of removing dirt, dust, and other debris from your deck as well as removing old layers of paint or stains from its surface. However, it is important to use the correct settings and nozzle tip in order to avoid damaging your wood.
Additionally, using a cleaning solution specifically formulated for pressure washers and sanding your deck before staining or painting it are both recommended in order to ensure that your deck is properly cleaned.
